Kikusui PLZ-U Series Operation Manual

STORE
Displays the setup
memory
number in which
the current panel settings are to be
saved.
If you press
this key while holding down the
SHIFf key
(SHIFT
4-
RECALL),
this key
and the STORE indicator illuminate
and the memory number is
displayed. Set the
memory number using the rotary knob.
[18-2]
ENTER key
This key is
used to enter
the memory number when saving
or recalling a setup mem-
ory.
[18-3]
LOCAL/KEY
LOCK key
LOCAL
Switches to panel
control (local control)
when the PLZ-U is being
controlled
remotely.
KEY
LOCK
Each time
you press this
key while holding down the
SHIFT key
(SHIFT +
LOCAL), the
key lock is
activated or released. When
releasing the lock,
hold the
key down until a
beep is heard.
[18-4]
CLEAR/CONFiG key
CLEAR
Clears the
alarm when
an alarm is
activated. However, the alarm can be
cleared only
when the
cause of the
alarm has been cleared.
CONFIG
Press
this key while
holding
down
the
SHIFT key (SHIFT + CLEAR)
to
enter con-
figuration mode.
PLZ-U
Names and
Functions of
Parts
3-7

Kikusui PLZ-U Series Specifications

General

Brand	Kikusui
Model	PLZ-U Series
Category	Control Unit
Language	English