Kikusui PLZ-U Series Operation Manual

5.12
Setup Memories
The
setup
memory can save up to
four
sets of settings
indicated below.
Saving and
recalling are done
on
all channels simultaneously.
Settings that are saved
Below are the
settings that are
saved
to the setup memory.
•
Operation mode (CC, CR, CV, and enabled/disabled
condition of +CV)
•
Current, resistance, or
voltage
value present at the time
of
saving
•
Range
setting
(RANGE/VRANGE)
•
Slew
rate
value (SLEW RATE)
•
Switching frequency, duty
cycle, and level
(FREQ,
DUTY,
and LEVEL)
•
Soft Stan
•
Configuration setting (CONFIG number 2 to
7)
•
Contents of ABC preset memories (A/B/C)
•
Auto load off timer
•
Sequence
For factory
default
settings, see section
5.13.3,
“Factory
Default Settings of
Setup
Memories.”
Saving
to the memory
L Press the STORE (SHIFT + RECALL) key.
The display switches to
the setup
memory
number
display.
The STORE key
and STORE indicator illuminate.
5-30
Application
Operation
PLZ-U

Kikusui PLZ-U Series Specifications

General

Brand	Kikusui
Model	PLZ-U Series
Category	Control Unit
Language	English