OI PT 1300 D English / Edition 3.0 / 23.10.2009
THE MAXIMUM SUBMERSION DEPTH IS BENEATH THE
UPPER SCAVENGING HOLE OF THE STATOR TUBE.
Switch on the control and operating module by using the ON/OFF switch. The unit
now runs at the lowest rotational speed of 2000 rpm. Once the ON / OFF button is
pressed the fan runs. This is required so that the motor is cooled in a continuous
operation.
WHEN THE LINE CORD IS PLUGED, NEVER TOUCH THE
SAW TEETH OF THE AGGREGATE – DANGER OF
INJURIESDUE TO ROTATING SHAFTS AND BLADES
After done work the handheld is turned off with the ON / OFF button. The unit stops
and the display shown OFF. The fan runs about 1 minute, then it stops
automatically.
To Next Page
Loading...