OI PT 1300 D English / Edition 3.0 / 23.10.2009
2.4 WARNINGS
Ensure that the rated voltage of the equipment matches the supply.
Before changing any dispersing aggregate, the line cord has to be
plugged out
IT IS IMPORTANT THAT THE MAINS SUPPLY WHERE THE DEVICE
IS PLUGGED IN COMPLIES WITH THE INFORMATION ON THE
TYPE LABEL AND THE INTERNATIONAL STANDARDS FOR POWER
SUPPLIES. IF NOT, SUCCESSFUL OPERATION CANNOT BE
GUARANTEED
In the event that hazardous chemicals or materials that endanger health
can influence the surroundings or use of the equipment, appropriate
countermeasures must be taken.
At long term use the aggregate and the coupling may get hot – danger
of skin burn.
The equipment may not be operated in explosive areas
It is not allowed to work with fluids, which are highly inflammable.
It is not allowed to mix materials which can cause strong exothermal
reactions
WARNINGS: TO BE CONTINUED ON NEXT PAGE
To Next Page
Loading...