Kinematica POLYTRON PT 1300 D - Use; Escription; Polytron  -A

OI PT 1300 D English / Edition 3.0 / 23.10.2009
Page 13 of 37
3 USE
POLYTRON

PT 1300 D handheld units are specially designed for the dispersing,
homogenizing, suspending, emulsifying, decomposing and mixing of organic and inorganic
sample material in small quantities.
3.1 DESCRIPTION
The POLYTRON

PT 1300 D consists of a microprocessor-controlled supply and control
module and a high-performance low-voltage drive with a control and operating module
including an LED display as well as a selection of three different homogenizing
aggregates. A hinged stand, a plate stand and a metal plate stand are also available as an
option.
For a ready-to-use system you need:
 Control module (Handheld)
 Supply module (Base station)
 A dispersing aggregate
 A mains connection according to the type label
3.2 POLYTRON

-AGGREGATES
Dispersing units (choice)
PT-DA
03/2EC-E50
PT-DA
05/2EC-E68
PT-DA
05/2EC-E85
PT-DA
07/2SYN-E082
PT-DA
07/2EC-E092
Shaft length, mm
50
68
85
82
92
Stator/Rotor
Ø, mm
2.2/3.5
5.5/3
5.5/3
7.8/5
7.8/5
Processing
volume
approx.
0.05 – 2 ml
Ca.
0.1 – 3 ml
Ca.
0.1 – 3 ml
Ca.
0.5 – 10 ml
Ca.
0.5 – 10 ml
Notes
-
-
-
Synthetik
Temperature
up to about 90 °C processing temperature
Pressure
not pressurised
Materials
stainless steel 1.4435 (316L) and PTFE compound
Cleaning
can be sterilised by all the usual methods, e.g. autoclave
Product
requirements
The product to be dispersed must be pumpable and fluid and must not
contain any solid particles that might destroy the attachment.