Kinetec Breva - Electrical Connection: Safety First; Using the Hand Control; Starting the Unit; Changing the Display Language

Breva EN 6/20
PL/flex dor/flex
20 STOP 0 20
PL/flex dor/flex
Please wait
KINETEC
Breva V01.0
10. Electrical connection: safety first.
2 versions of electrical protection are available for the device KINETEC
®
Breva
machine. The identification label shows which version a machine is equipped
with:
Type BF, Class II devices,
for home use, bear the following symbols:
Type B class I devices,
for use in a professional environment, bear the following symbol:
See page 18 for the meaning of the symbols.
Before connecting the device to the power supply, check that the mains
voltage matches that shown on the identification plate (100-240 V~ 50/60Hz).
Connect the hand control (13) and the motor (12).
Connect the power supply cable (30).
IMPORTANT
For Type B Class I devices, and to avoid all risks of electric shock, the machine should only be
connected to a power supply that has protective earthing.
To connect the power supply, only use the original cable supplied with the machine.
Check that the cables remain free around the device so that they do not get damaged.
Check that the machine is not damaged, in particular the protective housings.
11. Using the hand control
11.1. Starting the unit
Press the ON / OFF switch (11).
The display comes on, the machine carries out a self-test and the display shows in succession
Your device KINETEC
®
Breva is ready to be used.
Note: The parameters from the last session are retained when the machine is switched on/off.
(except Timer and Warm Up mode)
Warning: Always check the motion parameters displayed on the hand control before
starting the device.
11.2. Changing the display language
Beginning
Keys to
press
Display Remarks
Switch the unit ON
KINETEC
40 STOP 50 110
Check that the hand control is not
locked (See page 7).
Press simultaneously on the 2 keys
LANGUAGE
ENGLISH
The display indicates the language
selected.
To change the language
Or
LANGUAGE
FRENCH
The French language is selected.
Available languages: English, French,
German, Italian and Spanish.
To confirm the new language
OK
SWITCH ON/OFF
To exit and confirm the new
language, switch OFF and Switch ON
the unit.
13
12
30
11