unit (Km/h, Km). Shortly press the “MODE” button to
enter the unit setting interface. Shortly press the “UP”
or “DOWN” button to switch between metric unit
(km/h) and imperial unit (mph). Press the “MODE”
button again to confirm the setting item, save and
exit the unit setting interface at the same time.
Unit setting interface
7.6 Backlight Setting
The backlight brightness setting can set the backlight
brightness value of the display. The default value of
the display backlight is automatic adjustment mode.
Shortly press the “MODE” button to enter the
backlight brightness setting interface. Shortly press
the “UP” or “DOWN” button to select the backlight
brightness value (20/40/60/80/100/Auto). Press the
“MODE” button again to confirm the setting items,
save and exit the backlight setting interface at the
same time.
To Next Page
Loading...
