D1 PRO D1 PRO
⑥
Plug in the dash cam.
Simply connect the car charger to the dash cam, then insert the charger into the
car cigarette lighter for charging.
⑦
Use the pry tool to hide the cables.
Tip: The electrostatic sticker's adhesive properties may diminish over time or when
exposed to rain or direct sunlight. Please do not hesitate to contact customer service
for some free stickers.
④ Place the dash cam.
First, remove the film from the GPS electrostatic sticker, and apply it to the windshield.
Second, peel off the other film from the sticker, then attach the dash cam onto the sticker.
Last, press the suction cup mount firmly against the surface until it sticks securely.
⑤ Adjust the angle.
Adjust the dash cam's angle by tilting the mount or rotating the camera lens until it faces
directly ahead.
Tip: You can also attach the dash cam onto the windshield without using the sticker.
To Next Page
Loading...
