KingSlim D1 Pro - Playback on a Computer; Playback on the Kingslim APP

2. Playback on a computer
(1) Transfer data
Option 1: Transfer data using a USB cable.
① Connect the dash cam to your computer's USB port using a USB cable.
② When
the message pops up on the camera screen, please choose "Mass
Storage”, then press the OK button button to confirm.
③ Your computer will recognize the memory card. Please follow the prompts to
find the memory card drive on your computer, you will be able to see all the
video or photo files as well as the GPS player.
Option 2: Transfer data using a card reader.
① Take the memory card out of the dash cam. (Be sure to turn off the dash cam
first.)
② Insert it into a card reader, then insert the reader into your computer's USB
port.
③
Your computer will recognize the memory card. Please follow the prompts to
find the memory card drive on your computer, you will be able to see all the video
or photo files as well as the GPS player.
(2) Playback Videos
To play back videos, please download and install the GPS player, then drag any
of the video or photo files to the player. You can also visit this link to download
the player: https://kingslim.net/pages/app-gps-download.
Note:
①
Please close the anti-virus software on the computer before installing the player
or click “allow” when prompted.
②
The GPS player won't work on any computers running on the Linux system.
GPS data won't show if you playback the video on your own player.
3.
Playback on the Kingslim APP
You can also playback videos on the Kingslim APP after connecting your dash cam
to the APP. For more details, please refer to Download the Kingslim
APP→
Playback Videos on the APP.
What's
more, you can download videos from
the Kingslim app to your phone's photo album for local playback.
󾙔󾙕