After turning on the camera, press the button to stop recording.
To enter the video settings screen, first, press the Setup button to enter the
camera settings screen. Second, choose the first button, then press the OK
button to confirm. You will successfully access the video settings screen.
(1) Resolution
4K, 2K+1080P, 4K+1080P (The default setting is 4K+1080P)
To set the resolution, first, make sure the camera is on the video settings screen,
second, press the OK button to access the resolution settings screen. Third, press
the Down button to choose from the three options. Last, press the OK button to
save your changes. The system will exit automatically.
(2) Loop Recording
1 Minute, 2 Minutes, 3 Minutes (The default setting is 1 Minute)
The camera is designed to record video and save the content every minute by
default. When the memory is full, the new video files will overwrite the old ones to
ensure continuous recording. To change the video length, simply access the loop
recording settings screen to select your desired loop recording time.
(3) Dual Cam Display
Front, Cabin, Front/Cabin (The default setting is Front/Cabin)
By accessing this settings screen, you can switch between full-screen display
of the front/inside view and a picture-in-picture display of both cameras. You
can also quickly switch view modes by short-pressing the mode switching
button while in preview mode.
P
1. Video Settings
Camera Settings
To Next Page
Loading...
