(6) Beep Sound
Off, On (The default setting is on)
You can turn beep sounds on or off.
(7) Language
English, 简体中文, 繁体中文, Français, Español, Deutsc, Italiano, 日本語, 한국어 (The
default setting is English)
You can set the system language for your dash cam.
(8) Parking Monitor
Off, On (The default setting is Off)
When the car engine is off, the dash cam will enter parking monitor mode
automatically. If an impact or sudden braking is detected, the dash cam will
automatically start recording a 15-second video and save the content. The video
will be locked in the front or cabin emergency video folder and will not be
overwritten by new video files. By selecting a higher sensitivity level, your dash
cam will be more likely to detect smaller impacts and trigger emergency
recording.
(9) Frequency
50Hz, 60Hz (The default setting is 60Hz)
Frequency refer to the frequency of the alternating current (AC) that is used in most
electrical power systems around the world. We recommend you set Frequency to
60Hz.
(10) Fatigue Driving Reminder
Off, 1hour, 2hours, 4hours (The default setting is Off)
A safety feature commonly designed to alert drivers when they show signs of
drowsiness or fatigue. When the system detects potential signs of fatigue, it will
issue an audible or visual warning to the driver. You can choose turn it off or
set the time to remind you.
(11) Time zone
You can access the time zone settings screen to set the time zone according
to your location.
To Next Page
Loading...
