(3) Connect the camera’s Wifi. To do
this, go to your smartphone's Wifi
settings page, search for the Wifi
SSID, and then tap on it to enter
the password 12345678 for Wifi
connection.
Warm tip: ➀ The screenshots
below are for your reference only.
If you’re using an iPhone, we
recommend you turn off Celluar
before connecting the camera’s
Wifi.
“Kingslim_D4Pro-
****
”
➁ Once the camera Wifi is connected, it will give you a "No Internet Connection"
or “Weak Security” notice since the 4G signal of your phone is blocked, but you
can ignore it and continue the app connection.
(4) Access the Kingslim APP. To do this, open the Kingslim APP, then tap on the
“New Account” icon to enter your email and get a verification code for login.
Warm tip: You can tap “Skip” to directly enter the app without bothering to create
an account for login.
To Next Page
Loading...
