4. Getting Started
Welcome to your Kingslim E2 Pro dash cam. To capture videos and photos, you will
need a memory card (sold separately).
(1) Using memory cards.
Use brand name memory cards that meet these requirements:
• U3 Class 10 or above
• Capacity up to 256GB (FAT32)
Note:
➀ Before using, please format the memory card on your computer and then on the
Kingslim app.
➁ To keep your memory card in good condition, we recommend you reformat it
every two months. Reformatting deletes all of your data, so be sure to transfer
your photos and videos first.
➂ After repeated reading, writing, and wiping, the memory card’s lifespan will be
shortened. When the card frequently reports errors, please replace it with a new
one.
(2) Insert the memory card.
Locate the memory card slot, then insert the memory card with the label facing the
slot. To remove the card, simply press it into the slot with your fingernail, and it will
then pop out.
Note: Be sure to turn off the camera before installation or removal.
To Next Page
Loading...
