KingSlim E2 Pro - Install the Dash Cam Onto the Windshield

(3) Install the dash cam onto the windshield.
 Prepare the area.
Clean the area thoroughly with a microfiber cloth to remove any dust, dirt, or oil
that could affect the bracket's grip. After doing so, carefully peel off one film of the
electrostatic sticker and affix it to the clean area.
Tip: Make sure there is no air between the electrostatic sticker and the windshield,
as this is crucial for a stable installation.
 Attach the dash cam.
Tear off another film of the electrostatic sticker, and rip off the adhesive tape on the
dash cam bracket, then secure the dash cam on the electrostatic sticker.
Note:
➀ If you want to remove the dash cam, please take off the electrostatic sticker.
➁ You can stick the dash cam to the windshield without using the electrostatic sticker.
󾙓󾙒