(9) Date Stamp
On (default)/Off
With Date Stamp enabled, a date and time watermark will be added to your captured
videos, and vice versa.
(10) Image Mirror
On/Off (default)
Turn Image Mirror on or off. With this setting enabled, the rear camera is flipped
horizontally and its screen layout is reversed left and right.
(11) Restore to Factory Settings
Yes/No (default)
Reset all the settings to the default values.
(12) Format Recorder
Yes/No (default)
Format the memory card. Before capturing, you will need to complete the formatting
process. Reformatting erases all of your content, so be sure to offload your photos
and videos first.
(13) Firmware Version
Check the firmware version of your dash cam.
To Next Page
Loading...
