Kingtel KT52IP - BASIC SETTING; Keyboard

4. Use keypad to enter prefix.
5. Use Up/Down key to move to Length.
6. Use keypad to enter Length.
7. Use BACK or EXIT to return to idle screen.
5.17 Pre Dial
If this feature is enabled, digits dialed on-hook will be transmitted when the phone goes
off-hook
Press Menu ->Features-> Pre Dial-> Enter.
5.18 Call Logs
If this feature is disabled,you will not see the call logs.
1. Press Menu ->Features-> Enter->Call Logs-> Enter.
2. Use vol-/vol+ to enable.
5.19 Default Line
If this feature is disabled
,
The handset displays Greeting Words.
1. Press Menu ->Features-> Enter->Call Logs-> Enter.
2. Use vol-/vol+ to enable.
5.20 Auto Switch Line
If this feature is enabled,then the opportunity to use the first available line call path.
1. Press Menu ->Features-> Enter->Auto Switch Line-> Enter.
2. Use vol-/vol+ to enable.
6 Basic Setting
6.1 Keyboard
1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Keyboard->Enter.
2. There are four sets of keys which can be configured.
a) DSS Keys – Keys on the right side of the phone beside the Speakerphone button or
Line Keys.
b) Programmable Keys – Arrow keys and OK key
c) Desktop Long Pressed – Action to take when Programmable Key is pressed and
held.
d) Soft Key – Keys under the display
3. Use Up/Down key and Enter to select the key.
4. Use vol-/vol+to select the function.
5. Press OK to save.
6. Use BACK or EXIT to return to idle screen.