Kingtel KT52IP - Ring Settings

6.2 Screen Settings
1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Screen Settings->Enter.
2. The following items can be set.
a) Contrast – Set the contrast of the LCD.
b) Contrast Calibration – Set the level of contrast that the current contrast setting
provides.
c) Backlight – Enable or disable LCD backlight.
3. Press OK to save.
4. Use BACK or EXIT to return to idle screen.
6.3 Ring Settings
6.3.1 Ring Volume
1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Ring Settings->Enter->Ring
Volume->Enter.
2. Use vol-/vol+ to select the desired ring volume from the 9 choices. The phone will ring
at the selected volume shortly after it is selected.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
6.3.2 Ring Type
1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Ring Settings->Enter->Ring
Type->Enter.
2. Use vol-/vol+ to select the desired ring type. There are 9 standard types and 3 user types.
The user type can be configured from the web interface. The phone will ring at the
selected type shortly after it is selected.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
6.4 Voice Volume
1. Press Menu ->Settings-> Enter->Basic Setting-> Enter->Voice Volume->Enter.
2. Use vol-/vol+ to select the desired voice volume from the 9 choices.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
6.5 Time & Date
1. Press Menu ->Settings->Enter->Basic Settings-> Enter->Time & Date->Enter.
2. Use vol-/vol+ to choose Auto or Manual. If Auto is chosen, the phone will get date and
time information from a time server. The IP address of this server may need to be entered.