Time between resync to SNTP server. Default is 60 seconds.
If checked, clock is 12 hour mode. If unchecked, 24 hour mode.
Default is 24 hour mode.
Specify the date format. Fourteen different formats are available.
Four date separators are available: /, - , . , space
Daylight Saving Time Settings
Enable daylight saving time.
DST offset. Default is 60 minutes.
Start and end month for DST
Start and end week for DST
Start and end day for DST
Start and end hour for DST
Start and end minute for DST
Enter the values for the current year, month, day, hour and minute. All values are required.
Note: Be sure to disable SNTP service before entering manual time and date.
8.3.3.1 SIP Configuration
Configure a SIP server on this page.