Select Common or CTC ACS Server Type.
Enable/Disable TR069 Auto Login.
Time between transmissions of “Inform” Unit is seconds.
Syslog is a protocol used to record log messages using a client/server mechanism. The
Syslog server receives the messages from clients, and classifies them based on priority and
type. Then these messages will be written into a log by rules which the administrator has
configured. There are 8 levels of debug information.
System is unusable. This is the highest debug info level.
Action must be taken immediately.
Critical conditions. System is probably working incorrectly.
Error conditions. System may not work correctly.
Warning conditions. System may work correctly but needs
attention.
Normal but significant condition.
Debug messages normally used by system designer. This level
can only be displayed via telnet.
To Next Page
Loading...