Plug and Play(pnp) Settings
If this is enabled, the phone will send SIP SUBSCRIBE messages to
a multicast address when it boots up. Any SIP server understanding
that message will reply with a SIP NOTIFY message containing the
Auto Provisioning Server URL where the phones can request their
configuration.
PnP Transfer protocol – UDP or TCP
Interval time for querying PnP server. Default is 1 hour.
Set FTP/TFTP/HTTP server IP address for auto update. The address
can be an IP address or Domain name with subdirectory.
Specify the Protocol type FTP, TFTP or HTTP.
Specify configuration file name. The phone will use its MAC ID
as the config file name if this is blank.
Specify the update interval time. Default is 1 hour.
1. Disable – no update
2. Update after reboot – update only after reboot.
3. Update at time interval – update at periodic update interval
Enable/Disable TR069 configuration
To Next Page
Loading...