Kingtel KT52IP - ADVANCED SETTINGS; Accounts

If Manual is chosen, the date and time must be entered.
3. Use Up/Down key to move to the following items. Use vol-/vol+ to make selection.
a) SNTP Server – Time Server IP address – This is the only item that must be
configured if auto is chosen.
b) Time Zone – This is shown as an offset from GMT.
c) Format – Date Display format.
d) Type – Character used as delimiter in date display.
e) 12 Hour Clock – If disabled, clock is 24 hour.
f) Daylight Saving Time
4. Press Save.
5. Use BACK or EXIT to return to idle screen.
6.6 Greeting Words
This feature shows the words displayed in the upper left of the LCD. Default is VOIP
PHONE.
1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Greeting Word->Enter.
2. Enter the message using the keypad. It may be necessary to change the input mode
using the soft keys. Use DELETE to remove characters and 0 for space. Maximum
message length is 12 characters.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
6.7 Language
1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Language Set ->Enter.
2. Use vol-/vol+ to choose English or Chinese.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
7 Advanced Settings
7.1 Accounts
This allows configuration of SIP account parameters. After selecting one of the three
available accounts, the following items may be configured.
7.1.1 Basic Settings
1. Display Name – Name send in Caller ID
2. Outbound Proxy - SIP Outbound Proxy IP Address
3. Registration – Enable or disable registration for this account.
4. Server Address – SIP Server IP Address
5. Server Port – SIP Port – Default 5060