21. Press # to Do Blind Transfer - Press # after entering the target number for the transfer.
The phone will transfer the current call to the third party.
22. Blind Transfer on Onhook - Hang up after entering the target number for the transfer. The
phone will transfer the current call to the third party.
23. Attended Transfer on Onhook - Hang up after the third party answers. The phone will
transfer the current call to the third party.
24. Press DSS key to Do Blind Transfer ā after talking, press DSS key, programed to memory
key type, to make blind transfer directly.
Dial Plan Special Characters
Specifies a range of digits to match. May be a range, a list of ranges separated by
commas, or a list of digits.
Match any single digit that is dialed.
Match any arbitrary number of digits including none.
A time out period before digits are sent of n seconds in length. n is mandatory and can
have a value of 0 to 9 seconds. Tn must be the last 2 characters of a dial plan. If Tn is not
specified it is assumed to be T0 by default on all dial plans.
Cause extensions 1000-8999 to be dialed immediately
Cause 8 digit numbers beginning with 9 to be dialed immediately
Cause 911 to be dialed immediately
Cause 99 to be dialed after 4 seconds.
Cause any number beginning with 9911 to be dialed 4 seconds after dialing ceases.
To Next Page
Loading...