(1) Reserve Tank
(A) FULL (B) LOW
1. Check to see that the coolant level
is between the "FULL" and "LOW"
marks of recovery tank.
2. When the coolant level drops due
to evaporation, add water only up
to the full level.
In case of leakage, add anti-freeze
and water in the specied mixing ra-
tio up to the FULL level. (See "Flush
Cooling System and Changing Cool-
ant" in every 2 years maintenance)
CHECKING COOLANT LEVEL (F)
When using oil of different
maker or viscosity from the
previous one, remove all of
the old oil. Never mix two dif-
ferent types of oil.
Do not start the engine when
the oil level is below specica-
tion.
Wipe the oil dipstick with a
clean cloth or tissue. If foreign
material enters the tank, it can
lead to malfunction of the en-
gine.
Never add the oil over the up-
per limit of the dipstick.
IMPORTANT
3. The tractor is furnished with a mix-
ture of anti-freeze and water in a
ratio of 50:50 which is usable in
any season.
M46O709A
To Next Page
Loading...
Need help?
General
