Check wheel bolts and nuts regu-
larly especially when new. If they are
loose, tighten them as follows.
CHECKING WHEEL BOLT/NUT TORQUE (Q)
(1) Front Wheel Bolt / Nut
(2) Rear Wheel Bolt / Nut
Item Tightening torque
Front
wheel
Bolt 88 N
·
m (8.97 kgf
·
m)
Nut
88 N
·
m (8.97 kgf
·
m)
Rear
wheel
Bolt 122 N·m (12.44 kgf·m)
N
ut
122 N·m (12.44 kgf·m)
To avoid personal injury:
Never operate tractor with a
loose rim, wheel, or axle.
Any time bolts and nuts are
loosened, retighten to speci-
ed torque.
Check all bolts and nuts fre-
quently and keep them tight.
CAUTION
M46O723A
(1) Element (2) Cap
(3) Evacuator Valve
1. The air cleaner uses a dry element.
Never apply oil.
2. Dust should not accumulate in the
dust
cap or element. Remove and
clean the dust cap and the ele-
ment every week. If the tractor is
operated in extremely dusty condi-
tions, daily inspection is required.
3. Do not touch the lter element ex-
cept in cases where cleaning is
required.
REPLACING AIR CLEANER PRI-
MARY ELEMENT (T)
M46O724A
To Next Page
Loading...
Need help?
General
