Kioti CS2510H - Page 61

4
-
5
DESCRIPTION OF OPERATING SYSTEM
4

(C)
The position
"C" indicates the "ON"
position. As soon as the key switch
is turned to this position, the oil
pressure warning lamp and battery
charge warning lamp comes on.
(These turn off after the engine is
started)

ACC (B)
When the key switch is turned to
theposition"B",asherlights,horn
and power socket can be oper-
ated.
Caution before starting Engine.
1. Und er norm al co ndi tio n,
warning lamp turns on about
one second at the time of
Key-On, and then turns off
automatically.
2. In case of warning lamp ash
-
ing, conrm ashing pattern.
Refer to the warning indica-
tions at the time of error de-
tection.
3. Ensure to Key-Off at the time
of error rectify procedure.
4. Key-On again to confirm the
recovery after correcting error.
Do not operate Engine except in
case of emergency.
CAUTION

The pre-heating operation will
automatically be activated in this
position "C" (ON). The automatic
preheat operation is indicated
by the glow plug indicator. Make
sure to preheat the engine un-
til the glow plug indicator goes
off (approx. 6 seconds) in cold
weather before turning key switch
to start position.

CS2210

CS2510
NOTE
Temp. Pre-heating and indicating time
T
＞
40 0 sec
-15
＜
T
＜
40 6 sec
T
＜
-15 10 sec
Temp. Pre-heating and indicating time
T
＞
30 0 sec
-15
＜
T
＜
30 8 sec
T
＜
-15 15 sec
CS2510,2610-유럽,호주향-04.indd 5 2020-04-03 오전 9:41:31