4
-17DESCRIPTION OF OPERATING SYSTEM
SEAT SLIDING ADJUSTMENT
Pull the lever located under the front of
the seat and slide the seat to the de-
sire position. After adjustment, gently
rock in the seat to make sure it is se-
curely locked.
SEAT
(1) Seat (2) Seat Reclining Lever
(3) Seat Adjusting Lever(Front & Rear)
(4) Seat Control Handle(Cushion Load)
S43O437A
DIFFERENTIAL LOCK PEDAL
(1) Differential Lock Pedal
(A) Press to “ENGAGE”
(B) Release to “DISENGAGE”
Differential lock is applied only in cases
where: the wheels are likely to slip, or
only one of the rear wheel slips.
When the pedal is depressed, the dif-
ferential lock is engaged, and when the
pedal is released, the differential lock
is disengaged.
S43O436A
WARNING
!!
!!
!
If the tractor is turned with the
differential lock is engaged, it
can be dangerous. Necessarily
disengage the differential lock
prior to turning. If not, personal
injury may happen.
When using the differential lock,
decrease the engine RPM.
When the pedal is depressed,
the differential is engaged, and
when the pedal is released, the
differential is disengaged.
!!
!!
!
CAUTION
To Next Page
Loading...
