Operating the turn signal lamp switch
up and down turns on the corre-
sponding lamp in green.
TURN SIGNAL LAMPHEAD LIGHT HIGH BEAM LAMP
This lamp comes on in blue when the
high beam head light is switched on.
Driving with high beam head light
disturbs an approaching vehicle’
s visibility. For safe driving, use the
high beam head light only if neces-
sary.
GLOW PLUG INDICATOR
This indicates the operating condition
of the preheat system. When the key
switch is turned to the "ON" position,
this indicator comes on for approx. 8
seconds. It is recommended to start
the engine as soon as this indica-
tor goes off for best starting perfor-
mance.
This indicator may not turn
on if the engine is warm. In this case,
the engine can be started without the
preheat operation.
TE3O416A TE3O417A TE3O418A
To Next Page
Loading...
