Chapter 2 Basic Operation 2-4
2. 2 Turning off KIP 7100
1. There is a Power Switch on the right side of KIP 7100.
Press its “ ” side to turn off the KIP 7100.
Power Switch Press “ ” side.
CAUTION
The KIP 7100 print engine and UI appear to be shut down when you turn off KIP 7100.
However, the controller PC embedded inside the KIP 7100 is still operating and will
shutdown in approximately two minutes after Power Switch operation.
Do not unplug the KIP 7100 before the controller PC completes its shutdown. Doing so
may damage data or the device.
To Next Page
Loading...
