保修卡
Note:
Do not short out battery terminals or discard the battery in fire.
Do not disassemble the battery casing.
2.2 Installing/Uninstalling the Antenna
To install the antenna, plug the threaded end into the antenna interface, and
rotate the antenna clockwise until it is tight.
To uninstall the antenna, rotate it counterclockwise.
2.3 Installing/Uninstalling Belt Clip
To install the belt clip, align the two screw holes on the belt clip with the two at the
back of the radio, and fasten the clip using screws. To uninstall the belt clip,
loosen the screws, and then take off the belt clip.
To Next Page
Loading...
