Kistler 9323AAA - Important Notes; For Your Safety

Important notes
9323A_002-476e-11.24 Page 5
2. Important notes
It is essential for you to study the following notes, which
are for your personal safety during work, and to ensure
long term, fault-free operation of this product.
2.1 For your safety
 This product has been thoroughly tested and has left
the factory in a perfectly safe condition. In order to
maintain this condition and ensure safe operation, com-
pliance is required with the instructions and warning
notes in this instruction manual.
 The press force sensor must be installed, operated and
maintained only by persons who are familiar with this
product and who are adequately qualified for the work
involved.
 If it is to be assumed that safe operation is no longer
possible, the equipment must be shut down and made
safe against being accidentally started up.
Safe operation must be assumed to be no longer possi-
ble when the product
 shows visible signs of damage,
 has been overloaded,
 is no longer operating,
 has been in lengthy storage under unsuitable condi-
tions and,
 has been subjected to rough transport conditions.
Install the press force sensor in position as prescribed. De-
tails can be found in Section 4.2.
Secure all parts mounted on the press force sensor accor-
ding to anticipated moments!