KitchenAid 5KSM156 - Placing;Removing the Pouring Shield; Using the Pouring Shield

12
* Included only in models 5KSM150PS and 5KSM45. Also available as optional accessory.
Using the pouring shield*
1

motor head covers the U-shaped gap
in the shield. The pouring chute will be

as you face the Stand Mixer.
2
Pour the ingredients into the bowl
through the pouring chute.
ASSEMBLING THE STAND MIXER
Placing/removing the pouring shield*
4
Lift the front of the pouring shield
clear of the bowl rim and pull forward.
Remove attachment and bowl.
3
To Remove pouring shield: Turn
speed control to “O”. Unplug Stand
Mixer.
1
To place pouring shield: Turn speed
control to “O”. Unplug Stand Mixer.



2

the pouring shield over the bowl until
the shield is centered. The bottom rim
of the shield should fit within the bowl.

as well as to easily pour ingredients in the bowl while mixing.