Instructions for Use
Electrosurgical Unit Minicutter
10 Revision 08
4 Commissioning
For the assignment of the numbering, see section 4.2 Functions of the Control Elements, Connections and
Displays, page 6
4.1 Technical Specification
The unit can be used universally and has excellent performance data. The unit meets the latest safety
standards.
The unit is characterized by the following constructional characteristics:
• The characteristics of the HF generator result in an automatic power adjustment for differing operating
electrodes, tissue types and cutting speeds within large limits.
• Easy handling thanks to the clear arrangement of all control elements and their labeling with easy-to-
remember function symbols. The power output is adjusted via rotary knobs. All connections for active
electrodes, neutral electrodes and foot switches are located on the front side.
• Two current types for cutting: Smooth cutting and cutting with eschar formation.
• Two current types for coagulation: Choice between a coagulation current type with high power output
for contact coagulation and a coagulation current type with high crest factor for spray coagulation.
• One current type for bipolar coagulation.
• Optical and acoustic signals to indicate HF activation with activation LEDs in different colors and
signal tones.
• Connection of one-piece as well as of two-piece neutral electrodes.
• Safety system according to IEC 60601-2-2 for cases of a unit-related output-error.
• No opening or cooling vents, no cooling fan. Low power loss thanks to high efficiency of the
generators.
• Hygiene-friendly foil front plate.
• Practice-oriented, high-quality accessory components.
To Next Page
Loading...
