8.1 CAB IR Selector
Using the CAB IR rotary switch on the front panel, you can quickly and easily select from 6
different Cabinet settings.
OFF setting
The Off setting completely bypasses the Impulse Response Loader allowing the ENDGAME
to be used with a variety of other mono amp / cabinet simulators via the mono Input,
Stereo FX Return or for processing other signals which don’t require cabinet simulation.
V30 setting
Use the V30 setting to simulate a 4x12 closed-back cabinet equipped with Vintage 30s,
optimised for High Gain.
“A superbly versatile speaker that has found a home delivering a generous range of metal
and rock tones with tight bass, rich and vocal mid-range and an intricately detailed top
end. Clean tones are crisp and that famous upper midrange sits just right in the mix.”
GNBK setting
Use the GNBK setting to simulate a 4x12 closed-back cabinet equipped with Greenbacks,
optimised for High Gain.
“The G12M-65 is a modern incarnation of the speaker that helped dene rock tone; played
by legends like Clapton, Page and Beck. Expect a broad mid-range attack and a restrained
top-end with added grit and aggression”.
CMBK setting
Use the GMBK setting to simulate a 4x12 closed-back cabinet equipped with Creambacks,
optimised for Low Gain.
“The G12H-75 is a speaker with added power and with a heavier magnet that enables the
production of a tight bass with impactful highs, adding awesome thickness to single notes”.
UA setting (User Slot A)
ENDGAME has two storage slots for adding your own Impulse Responses. From the
factory, User Slot A (U⋅A) is loaded with G12M-65 (Left) and V30 (Right).
UB setting (User Slot B)
From the factory, User Slot A (U⋅A) is loaded with G12H-75 (left) and G12M-65 (right).
The UA and UBslots will default to the factory settings when no other Impulse Responses are
present in the respective mass storage device’s folder structure. For more information, see the
To Next Page
Loading...
