9. Stereo FX Loop
Integrating stereo effects into your signal chain is a common challenge for many guitarists.
Without the luxury of 2 ampliers (or the ability to turn them up if you have them) or for owners
of cabinets simulators that are usually mono by design, ENDGAME offers an easy to integrate and
distinctive solution to this challenge.
For the sake of long cable runs and to maximise signal clarity, ENDGAME’s serial Stereo FX Loop
is buffered. This means you can now hear your stereo pedals and other effects in their true
pristine glory.
Connect the Left and Right Sends on the (Right Panel) to the Left and Right Inputs on your stereo
device and connect the Left and Right Returns on ENDGAME to the Left and Right Outputs on
your stereo device.
You can quickly switch the loop on or off via the convenient soft footswitch.
To Next Page
Loading...
