Koala LENS - Service Web Page

14
10. SERVICE WEB PAGE
Power ON KOALA in SERVICE (press and hold the touch button for 5 seconds during startup), connect it to your
Ethernet or Wi-Fi, and then open the KOALA's IP in a browser to access the SERVICE WEB PAGE.
(KOALA's IP is displayed in SERVICE MENU > NETWORK)
Set the MODE from dropdown menu then click “SEND” button to execute.
ENTER
Use this mode for enter new data or refresh INFO data
SAVE
SAVE permanently data in KOALA
LOAD
Retrieve saved data
UPDATE
Run OTA update and continue on display menu
REBOOT
Reboot KOALA