Kodak 7000 - Connecting Printer Cables

Setting Up the Printer
1-5
Connecting the Cables
Connecting the Power
Cable
If you received more than one power cable with your printer, make sure to
use the correct power cable for your country.
1. Check that the power switch is turned off ( ).
CAUTION:
The power outlet must be grounded. An ungrounded outlet can
cause fire, electric shock, or harmful interference to nearby
electrical devices.
2. Connect the power cable to the power connector on the back of the
printer and to a grounded power outlet.
Connecting the USB
Cable
1. Check that the power switch is turned off ( ).
2. Connect the USB cable that was included with the printer to the USB
connector on the back of the printer and to the USB connector on the
computer.