3-2
Maintaining the Printer
Cleaning the Exterior
Never use abrasives or harsh chemicals to clean any part of the
printer. Do not allow any foreign objects or liquids to fall or
spill inside the printer. Fire or electric shock could result. If
any foreign object enters the printer, turn off the printer power
immediately, remove the power cord, and contact KODAK
Service and Support.
1. Wipe the exterior of the printer and trim tray with a damp, lint-free cloth.
2. Vacuum the filter openings to remove dust.
Cleaning the Thermal
Print Head and the
Peel Roller
1. Make sure the power switch is turned off ( ).
2. Open the top cover.
The thermal print head becomes extremely hot during normal
operation. Wait approximately five minutes after you open the
top cover before cleaning it. Fingerprints can damage the
thermal head. Never touch it with your bare hands or fingers.
3. Remove a new alcohol pad from its packaging. Move the pad along the
entire length of the thermal print head, in one direction only. When you
clean the thermal head:
• Apply firm, even pressure.
• Make three passes along the thermal print head.
• Use a clean part of the pad for each pass.
To Next Page
Loading...
