Kodak 7000 - Before You Begin Setup; Recommended Air Flow Clearances

1-2
Setting Up the Printer
Before You Begin
Make sure you have a KODAK Print Kit 6R (sold separately) available before
you begin your printer setup (see “Printer Supplies” on page A-2).
IMPORTANT: The printer weighs 62 lb (28 kg) and is heavier at the front
than at the back. Use caution when lifting or moving the
printer.
Recommended Air
Flow Clearances
If you plan to install the printer in a restricted space such as in a cabinet,
allow at least 2 in. (5 cm) of clearance on all sides for air flow.
2 in.
(5 cm)
2 in.
(5 cm)
2 in.
(5 cm)
2 in.
(5 cm)