Kodak 7000 - Chapter 3 Maintaining the Printer; Performing Routine Maintenance

3-1
3 Maintaining the Printer
To ensure good printer performance and high-quality prints, make sure the
KODAK 7000 Photo Printer and its environment are clean and dust free.
Performing Routine Maintenance
To maintain good print quality, clean the exterior of the printer and the filter
openings regularly (see page 3-2) to eliminate dust buildup and prevent
debris from entering the printer.
In addition, each time you change the ribbon, clean the:
• thermal print head and peel roller (see page 3-2).
• platen roller (see page 3-3).
• cleaning rollers (see page 3-4).
NOTE: If paper or ribbon is loaded in the printer, remove it before
performing maintenance procedures.
CAUTION:
Alcohol is a flammable liquid. It can cause eye irritation and
dry skin. Prolonged or repeated skin contact may cause drying,
cracking, or irritation. Wash your hands with soap and water
following any maintenance procedures where you use alcohol
pads. For additional information, see the Material Safety Data
Sheet (MSDS).
In the United States for information on health related issues, call
585-722-5151. Customers outside the U.S. can contact KODAK Service and
Support. For environmental issues related to Kodak products, contact Kodak
at 1-800-242-2424.