Troubleshooting
4-3
Clearing a Paper Jam
1. Press the Paper Rewind button twice.
2. Open the paper door.
3. If the paper is not fully rewound, manually rewind the paper onto the
roll.
To prevent damage to the printer, do not pull abruptly on the
paper.
4. Cut off any damaged or printed areas of the paper.
IMPORTANT: Be careful not to damage or mark any rollers.
5. Load the paper (see page 1-8), then close the paper door.
If the Paper Jam message is still displayed on the operator panel:
1. Open the front cover.
To Next Page
Loading...
