1-6
Setting Up the Printer
Turning On the Printer
Move the power switch to on ( | ).
On the operator panel, the orange Power light illuminates. If paper and
ribbon are loaded, a Ready message appears.
To turn off the printer:
• Move the power switch to off ( ).
Handling and Storing the Paper and Ribbon
For the best quality prints, carefully handle and store the paper and ribbon.
• To avoid fingerprints, handle the ribbon by the spool ends; do not touch
the ribbon material. Do not touch the glossy side of the paper.
• Store the paper and ribbon away from direct sunlight.
Loading the Ribbon
Make sure you have a KODAK Print Kit 6R (sold separately) available. This kit
contains the correct ribbon for your printer (see “Printer Supplies” on
page A-2).
The thermal head becomes extremely hot during normal
operation. Do not touch it.
1. Open the top cover. If you are replacing the ribbon, remove the used
ribbon.
NOTE: Images remain on the ribbon after printing. If you need to maintain
confidentiality, dispose of the used ribbon appropriately.
To Next Page
Loading...
