1-8
Setting Up the Printer
Connecting the Cables
Connecting the power
cable
You may have received more than one power cable with your printer. Be sure
to use the correct power cable required for your country.
1. Check that the power switch is turned off ( ).
CAUTION:
The power outlet must be grounded. An ungrounded outlet can
cause fire, electric shock, or harmful interference to nearby
electrical devices.
2. Connect the power cable to the power connector on the back of the
printer and to a grounded power outlet.
Connecting the USB
cable
Use the included USB cable.
1. Check that the power switch is turned off ( ).
2. Connect the USB cable to the USB connector on the printer and to the
USB connector on the computer.
To Next Page
Loading...
Need help?
General