4-1
4
Operating the Printer
Understanding the Operator Panel Lights
Using Setup Mode to Review Printer Settings
Use the operator panel to review printer settings in Setup mode.
Light Color Printer Status
Power Orange The printer power is on.
Ready Green The printer is ready to make prints.
Error Red An error has occurred.
1. Press Menu to enter Setup Mode.
2. Press Menu Scroll repeatedly to
scroll through the printer settings.
Printer settings
are displayed here
4. Press Clear to accept a change
3. Press Enter to initiate an action
3
1,2
4
or exit Setup Mode.
To Next Page
Loading...
