B-2
Safety and Regulatory Information
Safety Labels
Please observe the important safety warnings that are posted on the printer.
Regulatory and Safety Compliance
Safety Complies with UL 60950-1 First Edition—CAN/CSA C22.2 No. 60950-1-3 First
Edition
EN 60950-1
IEC 60950
Tested for Norwegian IT Power systems 240V phase to phase
Radio frequency
interference
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause interference to radio
communications. Operation of this equipment in a residential area is
likely to cause interference in which case the user will be required to
correct the interference at his or her own expense.
Requirements of the EMC directive 89/336/EEC were met through compliance
with the following:
• EN 55022: 98 (class A)
• EN 55024: 98 ITE Immunity includes the following:
EN61000-4-2 ESD
WARNING SHARP EDGES
Keep hands and fingers away.
To Next Page
Loading...
