Kodak Dryview 5800 - Operations; Unloading and Loading the Film Tray

Using and Maintaining the Imager
January 14, 2008 2G0733 2-7
Operations
Unloading and
loading the Film Tray
IMPORTANT: Leave the Imager powered on while loading or unloading
the film tray.
When 100 sheets of film have been used, a 0 film count appears on the
display screen, and the Imager will automatically unlock the film tray for
removal.
1. Remove the film tray from the Imager.
2. Remove the old film insert from the tray and discard in a manner
suitable to local ordinances.
NOTE: Before loading a new package of film, clean any particles from the
inside surface of the film tray, including the ramp and top edge of
the tray.
Film insert