Troubleshooting
January 14, 2008 2G0733 3-19
7. Remove any misplaced films seen in the pickup access areas.
8. Set the left panel in place and tighten the 2 screws.
9. Close the hood.
Film Jam - Code
26325
IMPORTANT: If this error occurred at the same time as 2x-126, follow the
instructions for “Film Jam - Code 2x126”.
1. If this error occurred alone, open and close the hood to clear the error.
2. If this error repeats, restart the Imager.
Film Jam - Codes
26326 or 26543
1. Open the hood.
2. Remove any misplaced films.
Hot surface.
3. Undo the drum cover latches and lift the drum cover.
Hood
Drum cover latches
Drum cover
To Next Page
Loading...
