2-4 2G0733 2011-09-09
Using and Maintaining the Imager
Icons in Menu Selection Mode
The following icons appear on the display screen when you are in
Menu Selection Mode. These icons represent the changed
functionality of the buttons on the right side of the local panel.
While in Menu Selection Mode, press the button (6 in the graphic
on page 2-2) to display the Test Print or Maintenance Reset screen.
These icons indicate that the buttons shown by 8 in the graphic on
page 2-2 have changed functionality. Rather than being used as
Calibration buttons, you now use these buttons to move up or down
in the menu on the displays screen.
This icon indicates that the button shown by the upper 7 in the
graphic on page 2-2 is no longer an Unlock button. Instead, use the
button to select the currently highlighted menu item.
This icon indicates that the button shown by the lower 7 in the
graphic on page 2-2 is no longer an Unlock button. Instead, use the
button to cancel the selection.
Icon Description
To Next Page
Loading...
