Working with pictures/videos
www.kodak.com/go/support
25
Running a slide show
Use Slide Show to display your pictures/videos on the LCD.
NOTE: If you have a Kodak EasyShare HDTV dock, see its Getting Started Guide.
1 Press the Review button.
2 Press the Menu button, then tap the Review tab.
3 Tap Slide Show, then tap Begin Show.
Each picture/video is displayed once. To interrupt the Slide Show, tap OK.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display
interval from 3–60 seconds.
1 On the Slide Show menu, tap Interval.
2 Select a display interval.
To scroll through the seconds quickly, touch and hold .
3 Tap X in the top right corner of the LCD. Tap Begin Show.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, tap Loop.
2 Tap On.
3 Tap X in the top right corner of the LCD.
The slide show repeats until you tap OK or until the battery is exhausted.
To Next Page
Loading...
Need help?
General
