Doing more with your camera
www.kodak.com/go/support
39
Taking panoramic pictures
Use panorama to “stitch” up to 3 pictures into a panoramic scene.
NOTE: For best results, use a tripod. Only the panoramic picture is saved; individual pictures are not.
(Exposure and white balance are set with the first picture. The flash is set to Off.)
1 Open the Main menu. Tap Mode, then Tap SCN (Scene).
2 Tap Panorama Left-Right or Panorama Right-Left (depending on the direction you
want to pan), then tap OK.
3 Take the first picture.
After a quickview, the LCD displays the liveview and an “overlay” from the first picture.
4 Compose the second picture. Make the overlay from the first picture cover the
same portion in the new picture. (You can tap Delete to re-take a picture.)
5 If you are taking only 2 pictures, tap Stitch to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
NOTE: To use the self-timer 10-second or 2-second setting, see page 13.
Take 2 or 3
pictures.
Get 1
panoramic picture.
To Next Page
Loading...
Need help?
General
