Taking pictures and videos
www.kodak.com/go/support
11
Using the auto-focus framing marks
When using the camera EVF/LCD screen as a viewfinder, framing marks indicate
where the camera is focusing. For the best pictures, the camera attempts to focus on
foreground subjects, even if the subjects are not centered in the scene.
1 Press the Shutter button halfway and hold.
When the framing marks turn from blue to green, focus is accomplished.
2 If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button and recompose the scene.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus
Zone (page 33) and set Center Zone, the framing marks are fixed at Center Wide.
While the shutter button is pressed halfway:
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
Framing marks
To Next Page
Loading...
Need help?
General
